![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577178.webp)
3/99
General Procedures/Information
5-64
Xerox DocuPrint N17 Service Manual
DUPLEX PROC.
ADJUSTMENT
to F (16 steps) [Factory default value: A]
Yes
Sets the lead edge registration
for duplex print.
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.54mm per step.
DUPLEX SCAN
ADJUSTMENT
0 to 8 (9 steps) [Factory default value: 4]
Yes
Sets the side edge registration
for duplex print.
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step
MBF PROC.
ADJUSTMENT
0 to F (16 steps) [Factory default value: A]
Yes
Sets the lead edge registration
for paper fed from MBF.
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.54mm per step.
MBF SCAN
ADJUSTMENT
0 to 8 (9 steps) [Factory default value: 4]
Yes
Sets the side edge registration
for paper fed from MBF.
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step.
ENVELOPE PROC.
ADJUSTMENT
0 to F (16 steps) [Factory default value: A]
Yes
Sets the lead edge registration
for envelope fed from Envelope
Tray.
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.54mm per step.
ENVELOPE SCAN
ADJUSTMENT
0 to 8 (9 steps) [Factory default value: 4]
Yes
Sets the side edge registration
for envelope fed from Envelope
Tray.
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step
TEST PRINT
OPERATION
Press the Enter key to produce the grid
test print shown in Figure 5.2.2.1.
Message Displayed on LCD
(Top Line)
Option Values
[Factory Defaults]
Are
Changes
Possible?
Function
Option Description
www.printcopy.info
www.printcopy.info