![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577146.webp)
3/99
General Procedures/Information
5-32
Xerox DocuPrint N17 Service Manual
5.2.1.4 Reading Fuser Temperature
This diagnostic displays the current temperature of the fuser.
Execute Reading Fuser Temperature:
1 Enter Diagnostics Mode 1.
The LCD displays PRINT COUNTER OPERATION indicating the
printer is in Diagnostics Mode 1.
2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays READING FUSER
TEMPERATURE.
3 Press the ENTER key to start the test.
The LCD displays a two-digit temperature code within the range that corresponds to the 16
temperature steps (see Table 5.2.1.4.1).
4 The temperature code displayed will continually change as the fuser heats up and cools down.
5 If you wish to exit this test and enter another test, press the ITEM UP (2) key to exit, then use the
MENU UP (1) or MENU DOWN (5) key to scroll to another test.
6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.
READING FUSER
Current Temp = XX
www.printcopy.info
www.printcopy.info