6/98
Xerox DocuPrint N17 Service Manual
4-45
Repair/Adjustment Procedures
4.9.3 Exit Gate
Removal
1 Remove the Top Cover Assembly (
REP 4.2.6 Top Cover Assembly).
2 Turn the Top Cover Assembly over.
3 Remove the four screws securing the Exit Assembly, and remove the Assembly from the Top
Cover Assembly.
4 Bend the Exit Gate to remove the Gate from the Exit Motor end of the Exit Assembly.
5 Unlatch the shaft on the Direction Spring side of the Exit Gate, and remove the Gate and
Direction Spring from the Exit Assembly.
6 Remove the Direction Spring from the Exit Gate.
Figure 4.9.3.1 Exit Gate Removal
Replacement
Perform the removal steps in reverse order.
SAS450F.CDR
sas450fa
www.printcopy.info
www.printcopy.info