7/99
Repair Analysis Procedures (RAPs)
7-88
Xerox DocuPrint N17 Service Manual
Spots
Inspect the test prints for spots ( Figure 7.5.3.10). Within a 208 x 95 mm square:
• There should be no spots larger than or equal to 0.5 mm visible on the prints.
• There should be no more than 1 spot measuring between 0.4 mm and 0.5 mm visible
on the print.
• There should be no more than 16 spots measuring between 0.25 mm and 0.4 mm
visible on the print.
• Any spot measuring less than 0.25 mm is acceptable.
The prints are free of spots or the spots that are visible fall within the acceptable range.
Y: Go to Other Print Defects checkout on the next page.
N: Go to
Figure 7.5.3.10 Spots
asm7-18
www.printcopy.info
www.printcopy.info
