6/98
Offset Catch Tray (OCT) Option
9-18
Xerox DocuPrint N17 Service Manual
9.3.11 Exit Roll Assembly
Removal
1 Remove the Offset Assembly (
REP 9.3.9 Offset Assembly/Exit Sensor Assembly).
2 Release the latch of the Exit Bearing at the right side and lift off the Exit Bearing.
3 Press the latch of the Gear to disengage and pull the shaft towards the right to slide the Gear off
of the shaft.
4 Remove the shaft together with the Exit Roll Assembly.
Figure 9.3.11.1 Removing the Exit Roll Assembly
Replacement
Perform the removal steps in reverse order.
SAS4ACFA
www.printcopy.info
www.printcopy.info
