![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577135.webp)
3/99
Xerox DocuPrint N17 Service Manual
5-21
General Procedures/Information
5.1.4.12 Novell Menu
The Novell Menu allows you to modify Novell parameters. It appears only if Novell is enabled from the
Ethernet menu. To select the Novell Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until “Novell Menu” is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Novell submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Figure 5.1.4.12.1 Novell Menu
Novell Enable
Novell PDL
Novell Binary PS
Novell Mode
Frame Type
Polling Interval
PServer Name
Primary Server
NDS Tree
NDS Context
Auto *
PostScript
PCL
Auto*
SNAP
802.2
Ethernet II
802.3
1 - 29 (2*)
xxxxxxxxxxxxxxx
NDS
NDS/BEM*
BEM
xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
Job Menu
Password Menu
1
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
Ethernet Menu
2
Token Ring Menu
2
Novell Menu
3
Print Menu
4
Reset Menu
5
On*
Off
On*
Off
1
Appears only when the hard drive is installed.
2
Appear only when the option is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
www.printcopy.info
www.printcopy.info