![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577131.webp)
3/99
Xerox DocuPrint N17 Service Manual
5-17
General Procedures/Information
5.1.4.10 Ethernet Menu
The Ethernet Menu set options for the Ethernet port. To select the Ethernet Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until “Ethernet Menu” is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Ethernet submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Figure 5.1.4.10.1 Ethernet Menu
LPR Enable
LPR Banner
LPR PDL
LPR Binary PS
DLC/LLC Enable
DLC LLC PDL
DLC/LLC Bin PS
NetBeui Enable
NetBeui PDL
NetBeui Bin PS
AppSocket Enable
On*
Off
On
Off*
On
Off*
Auto*
PostScript
PCL
On*
Off
Auto*
PostScript
PCL
On
Off*
Auto*
PostScript
PCL
On*
Off
Job Menu
Password Menu
1
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
Ethernet Menu
2
Token Ring Menu
2
Novell Menu
3
Print Menu
4
Reset Menu
5
On
Off*
On*
Off
1
Appears only when the hard drive is installed.
2
Appear only when the option is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
Continued on next page.
www.printcopy.info
www.printcopy.info