![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577462.webp)
6/98
Duplex Module Option
10-18
Xerox DocuPrint N17 Service Manual
10.3.11 Duplex Transfer Roller Assembly
Removal
1 Remove the Duplex Cover (
2 Slide the Roller Gear off the shaft of each of the two Duplex Transfer Roller Assemblies, pulling
the lever on the gear away from the shaft.
3 Slide the bearing off the shaft of each Duplex Transfer Roller Assembly.
4 Shift each Duplex Transfer Roller Assembly to the inside to align the chordal grooves in the shaft
with the supporting wall (with the grooves directed vertically) and then lift and pull towards the
Duplex PWB.
Figure 10.3.11.1 Duplex Transfer Roller Assembly
Replacement
Perform the removal steps in reverse order.
SAS492F
Duplex Transfer
Roller Assembly
Roller Gear
Chordal Groove
www.printcopy.info
www.printcopy.info