6/98
Xerox DocuPrint N17 Service Manual
7-101
Repair Analysis Procedures (RAPs)
7.5.15 Misregistered Image
Definition
Displaced position of the image from its intended position on the print.
See
Figure 7.5.2.2 System Controller Test Print Pattern.
Procedure:
1 Make sure the paper trays are installed properly and the pressure plates and snubbers (metal
tabs located on the front of the paper trays) are not damaged.
Y: Go to step 2.
N: Repair or replace the Paper Tray.
2 The paper path, between the paper trays and the Registration Roll, is free of obstructions.
Y: Go to step 3.
N: Clean or repair the paper path components.
3 The vertical registration varies between prints.
Y: Replace the Registration Rolls.
N: Go to step 4.
4 Perform the Vertical Registration and Horizontal Registration adjustments (see
and Verification of Registration).
Does the registered image meet specification?
Y: Problem resolved.
N: Replace the Paper Tray. If the problem persists, replace the following components:
- Paper Handling Unit Assembly
- Drive Motor Assembly
- Printer Engine Controller
LEAD EDGE
We conduct many of
ever, these mail s
coverage. Would yo
your time to read
survey has been de
time and effort. T
test pattern; a qu
envelope are enclou
We conduct many of
ever, these mail s
coverage. Would yo
your time to read
survey has been de
time and effort. T
test pattern; a qu
envelope are enclou
1
3 2
1
1
2
2
3
3
1
3 2
1
1
2
2
3
3
PROCESS
SCAN
Test Print
N17-941110-2-S
8.5x11 (SEF)
SAS1002
www.printcopy.info
www.printcopy.info