![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577416.webp)
6/98
Offset Catch Tray (OCT) Option
9-14
Xerox DocuPrint N17 Service Manual
9.3.7 Direction Solenoid/Solenoid Lever
Removal
1 Remove the Lower Chute (
REP 9.3.6 Lower Chute/Full Stack Sensor/Full Stack Actuator).
2 Disconnect the Solenoid Harness from the relay connector between the Connector Harness
Assembly and Solenoid.
3 Remove the two screws which fasten the Solenoid.
4 Slide the Solenoid off the Solenoid Lever.
5 Pry off the Exit Chute latch near the Direction Solenoid.
6 Slide the Solenoid Lever off the pivot projection.
Figure 9.3.7.1 Removing the Solenoid/Solenoid Lever
Replacement
Perform the removal steps in reverse order.
SAS4A8F
www.printcopy.info
www.printcopy.info