6/98
Repair/Adjustment Procedures
4-52
Xerox DocuPrint N17 Service Manual
4.10.2 Drive Assembly
Removal
1 Remove the BTR Chute Assembly (
REP 4.7.2 BTR Chute Assembly).
2 Remove the Main Motor Assembly (
REP 4.10.1 Main Motor Assembly).
NOTE: It is not necessary to completely remove the Print Engine Controller to access the Drive
Assembly securing screws.
3 Partially remove the Print Engine Controller (
REP 4.12.3 Print Engine Controller).
4 Remove the four screws securing the Drive Assembly to the Frame. (See Figure 4.10.2.1.)
5 Remove the screw securing the “P” clamp.
6 Pull the Drive Assembly towards the front of the printer and remove the Assembly.
Figure 4.10.2.1 Drive Assembly Removal
Replacement
Perform the removal steps in reverse order.
SAS457F.CDR
SAS457FC
www.printcopy.info
www.printcopy.info
