6/98
Xerox DocuPrint N17 Service Manual
4-41
Repair/Adjustment Procedures
4.7.2 BTR Chute Assembly
Removal
1 Remove the Paper Handling Unit Assembly (
REP 4.5.1 Paper Handling Unit Assembly).
2 Remove the two screws securing the BTR Chute Assembly. (See Figure 4.7.2.1.)
3 Remove the two screws securing the HVPS leads.
4 Remove the Duplex Module, if present.
5 Remove the Fuser Module (
REP 4.8.1 Fuser Assembly (CRU)).
6 Remove the rear screw securing the BTR Chute Assembly to the Frame.
7 Lift the BTR Chute Assembly upward and remove it.
Figure 4.7.2.1 BTR Chute Assembly removal
Replacement
Perform the removal steps in reverse order.
SAS436F.CDR
Red
Pink
SAS436FC
www.printcopy.info
www.printcopy.info
