![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577272.webp)
6/98
Repair Analysis Procedures (RAPs)
7-22
Xerox DocuPrint N17 Service Manual
13 There is nothing wrong with paper being fed into the Decurl Roll.
NOTE: Open the Rear Cover Assembly and insert a piece of paper into the Rear Cover Sensor. Perform
a visual inspection by generating a test print.
Y: Go to step 14.
N: Replace the Fuser Assembly.
14 Ensure the Exit Actuator uncovers the Exit Photo Sensor when it detects the presence of a sheet,
and covers it when no sheet is present.
NOTE: This can be inspected by performing Diagnostic Mode 1, Sensor Input Test.
Y: Go to step 15.
N: Go to
RAP 7.4.22 Exit Assembly Failure.
15 Nothing seems wrong with paper from the Fuser Assembly being fed into the inlet between the
Exit Roll Assembly and the Middle Roll Assembly.
NOTE: Remove the Option Cover and perform a visual inspection through the opening.
Y: Replace the Print Engine Controller.
N: Replace the Exit Assembly or the Rear Cover Assembly.
www.printcopy.info
www.printcopy.info