![background image](http://html1.mh-extra.com/html/xerox/docuprint-n17/docuprint-n17_service-manual_4131577112.webp)
6/98
Repair/Adjustment Procedures
4-60
Xerox DocuPrint N17 Service Manual
4.12.5 Fuser PWB
Removal
1 Remove the BTR Chute Assembly (
REP 4.7.2 BTR Chute Assembly).
2 Remove the System Controller Chassis (
REP 4.12.1 System Controller Chassis).
3 Disconnect P3 from the LVPS. (See Figure 4.12.5.1.)
4 Disconnect P115 from the HVPS.
5 Remove the wire harnesses from the rear, and slide the PWB Fuser out of the channel.
Figure 4.12.5.1 Fuser PWB Removal
Replacement
Perform the removal steps in reverse order.
SAS468F.CDR
SAS468F
www.printcopy.info
www.printcopy.info