background image

Print Driver Installation for Netware 

 
Refer to the System Administration Guide in the User Documentation CD for complete 
instructions on loading drivers. 

Print Driver Installation information for printing using AppleTalk 

 
Printer Type:  

Adobe PS

 

Printer Name:  

DocuColor2240 

 
PPD Selection – 

Double-click the appropriate file in the MAC folder of the Driver  

Software CD.

 

Use AdobePS  Inst - 8.7.3 for OS 8.6 or later. 
Use AdobePS Inst -  8.7.0 for OS 8.5 
Use AdobePS Inst -  8.5.1 for OS 7.1 through 8.1 
 
Follow the on-screen instructions, click “Install”, and restart workstation when 
prompted. 
Open Chooser, select Adobe PS printer, and locate your printer in the displayed list. 
Click “Create” for initial installations or “Setup” for all subsequent installations 
Click “Select PPD”, highlight your Printer’s PPD, and click “ok”. 
 
Refer to the System Administration Guide in the User Documentation CD for complete 
instructions on loading drivers. 

Print Driver Installation information for printing using SMB 

 
Add Printer wizard 
Network Printer 
Browse Network for printer: Refer to the Settings List for workgroup / printer name. 
For Client Server browse network for server / Queue. 
Print Queue:  “Printer Name”-p  (Default: fx-0d3595-p) 
 
For complete instructions on setting up the Printer in a Net BIOS over IP environment 
(also known as SMB), refer to the System Administration Guide in the User  
Documentation CD. 

 

701P38613 

               Port Setup 

 

Follow this procedure if you want to make any changes to the Port Settings.  

If no 

changes are require, continue on Step 3.

 

1.

Press “Access” button on the User Interface Control Panel. 

2.

Enter “System Administrator” Password. (Default – 11111) 

3.

Press “Confirm”  

4.

Press “System Settings” 

5.

Press “System Settings”  

6.

Press “Network Settings” 

7.

Select “Port Settings” 

8.

Select desired Port. 

9.

Select “Change Settings” 

10. Follow Screen instructions to modify the port setting. 
11. Select “Close”  to return to the “Network Settings” screen and continue with item 7 in Step 3 

“Protocol Setup”. 

12. If no further changes are required, continue to select “Close” to exit the System Setup. 
13. Continue on Step 4. 

D

OCU

C

OLOR

 2240 / 1632  

 

QUICK CONNECT GUIDE 

 

Purpose:

  Refer to this guide to modify the printer network settings at the printer user interface 

screen if required.  For complete instructions refer to the Customer Documentation CD. 

Note:

  A Network Administrator is required to ensure that the printer is configured properly.   

To properly configure the printer, the Network Administrator must supply an IP Address, a Subnet 
Mask, and a Gateway Address if applicable.  For information to configure the printer on  a Novell 
network refer to the System Administration Guide in the Customer Documentation CD. 

Procedure:  

The DocuColor 2240/1632 has been designed to connect to most networks with minimal 

changes.  Connect the printer to the network and review the Default Printer Settings.  Continue with 
Steps 2-6 and make changes to the printer port / network settings if required to enable it on your  
network. 

 

  -  These are the Default Printer Settings 

 

Default Port Settings                                      Default Network Settings 

 

Parallel—Enabled                                                     IP Address: Get IP Address (DHCP) 
LPD—Enabled                                                          Printer Name:  FX-0D3595 
Netware—Disabled                                                   Workgroup:  “WORKGROUP” 
SMB—Enabled                                                         Print Queue:  fx-0d3595 
IPP—Enabled 
Ethertalk—Enabled 
Salutation—Enabled 
Port 9100—Enabled 
SNMP—Enabled 
FTP Client—Enabled 
Internet Service—Enabled 

Reviews: