Wintriss SmartPAC PRO Servo, User Manual

Page: 80 / 228

1147100 SmartPAC PRO Servo User Manual
80 Chapter 4
– Initialization Mode
NOTICE
You can plug a computer keyboard into the USB port to enter cam channel names.
5.
Key in a “custom” name and press Enter. The on-screen keyboard closes and the “custom” name
you selected will be displayed to the right of the selected channel.
6. When you are finished naming channels, press Back to return to the Main Initialization Menu.
SET GLOBAL CAMS (Optional)
(INITIALIZATION
– SET CAM NAMES)
PROGRAMMABLE CAM SWITCH NOT FOR SAFETY USE
Use SmartPAC PRO Servo
’s programmable cam switch to control auxiliary functions only. The
SmartPAC PRO Servo programmable cam capability should never be used to provide timing
signals for any safety use including clutch/brake control or muting of light curtains.
Failure to comply with these instructions will result in death or serious injury.
This item, which appears on the Main Initialization Menu only when ProCamPAC is installed, allows
you to make settings for selected cam channels that apply to all tools programmed on your SmartPAC
PRO Servo. To program a global cam, do the following:
NOTICE
If you want to name the cam channel, do so before you program it as a global cam. Enter the cam
name as instructed in
SELECT CAM NAMES (Optional) , page 78.
1. Select SET GLOBAL CAMS on the Main Initialization Menu. The Global Cams menu displays,
Figure 4-12. An asterisk (*) indicates the channels that are already programmed as global cams.