Wintriss SmartPAC PRO Servo, User Manual

Page: 134 / 228

1147100 SmartPAC PRO Servo User Manual
134 Chapter 5
– Program Mode
Otherwise, press RESET to return to the Die Protection Sensor Menu. The highlight bar
automatically scrolls down to the next sensor displayed on the menu.
Setting the Counter Value for a Green Special Sensor
When you select GREEN SPECIAL as the sensor type on the Sensor Type screen, the Green Special
Sensor Stroke Count screen displays, Figure 5-30. On this screen, you set the number of strokes that
the press can make before the Green Special sensor must actuate.
Figure 5-30. Green Special Sensor Stroke Count Screen
NOTICE
For more information about Green Special sensors, refer to Understanding Sensor Terminology ,
page 121.
To set the Green Special sensor stroke count, do the following:
1. On the Green Special Sensor Stroke Count screen, increment or decrement the stroke counter
(maximum value is 99), using the Up (

) or Down (

) cursor key, until the value you want is
displayed.
2. Press RESET. The Sensor Settings screen, Figure 5-31, displays with all your sensor settings
shown.
3. If you want to change any settings, refer to Viewing and Changing Sensor Settings (next section).
Otherwise, press RESET again to return to the Die Protection Sensor Menu. The highlight bar
automatically scrolls down to the next sensor displayed on the menu.