manualshive.com logo in svg

Wintriss SmartPAC PRO Servo, User Manual

Introducing the Wintriss SmartPAC PRO Servo, a cutting-edge industrial control system designed to optimize manufacturing processes. Unlock the full potential of your machine with our comprehensive User Manual, available for free download on our website. Explore possibilities and enhance productivity with our advanced technology. Get your manual now from manualshive.com.

Share
Download
background image

SmartPAC PRO Servo User Manual 

1147100 

Chapter 6 

– Run Mode 

169 

The On/Off actuation angles displayed in the Sensor window are not updated on every stroke. For 
green and green quick check sensors, SmartPAC PRO Servo displays the earliest On and latest Off 
angles for the current sequence of press strokes (you press UPDATE THE SENSOR ARC), updating 
the display only when the sensor turns on before the previous earliest On signal or turns off after the 
previous latest Off signal. 

For green constant sensors, SmartPAC PRO Servo displays the latest On and earliest Off angles, 
updating the display only when the sensor turns on after the previous latest On angle and turns off 
before the previous earliest Off angle. 

EXAMPLE 

If the On angle for a green quick check sensor fluctuates between 190° and 195° from stroke to 
stroke, SmartPAC PRO Servo continuously displays 190° 

as the sensor’s On value. However, if 

the On angle changes to 189°, SmartPAC PRO Servo displays the On angle as 189° on the 
next stroke. 

To clear the actuation angles displayed for a sensor, press UPDATE THE SENSOR ARC. If the press 
is stopped, the Sensor window displays zeros. If the press is running, SmartPAC PRO Servo displays 
the actuation angles for the next stroke. 

 

NOTICE 

Pressing UPDATE THE SENSOR ARC will not properly update sensor actuations when you are 
using a mechanical sensor, which vibrates constantly during the stroke. It is better to use an 
electronic sensor, which is not prone to constant contact bounce.. 

 

Pressing CHANGE REFERENCE ANGLE changes the reference angle used to determine 
earliest/latest On and Off signals from 0°, the default, to 180°. Executing this function may be 
necessary to correct On readings for green and green quick check sensors that actuate before and stay 
actuated after TDC. When 0° is the reference angle, there can be no earliest On angle for a sensor that 
turns on before and off after 0° since angles just before TDC (e.g., 330°) are numerically greater than 
those just after TDC (e.g., 30°). You should press CHANGE REFERENCE ANGLE whenever the 
On/Off settings in the Sensor window do not match the start and end points of the green actuation arc 
on the clock diagram. 

To adjust the Ready signal for green sensors, do the following: 

 

NOTICE 

IF YOU DO NOT KNOW READY SIGNAL TIMING FOR GREEN SENSORS 

If you are unsure of when the sensor turns on and off, program estimated settings in Program 
mode, load the tool, and turn off the sensor, using the SENSOR ENABLE/DISABLE & STATUS 
item (see page 156) on the Main Program Menu. Turning the sensor off prevents nuisance stops 
when you switch to Run mode. 

Then, without reloading the tool, turn the Program/Run switch to RUN and perform the procedure 
shown below. When you are finished adjusting settings in Run mode, go back to Program mode 
and turn the sensor back on. 

 

1.

 

On the Die Protection Menu, select the desired sensor. The Ready Signal Programming screen 
displays. 

Summary of Contents for SmartPAC PRO Servo





































































































































































































































Reviews:

No comments

Related manuals for SmartPAC PRO Servo

ABB Relion REC670 Product Manual preview
Relion REC670
Brand: ABB Pages: 138
ABB Relion REC670 Operator'S Manual preview
Relion REC670
Brand: ABB Pages: 116
ABB Relion 615 series Operation Manual preview
Relion 615 series
Brand: ABB Pages: 136
UE 120 Series Installation And Maintenance Instructions preview
120 Series
Brand: UE Pages: 4
XBOX 360 Manual preview
360
Brand: XBOX Pages: 7
Haier YR-H71 Service Manual preview
YR-H71
Brand: Haier Pages: 58
Gardena 4030 Operator'S Manual preview
4030
Brand: Gardena Pages: 16
MADRIX STELLA Technical Manual & Quick Start Manual preview
STELLA
Brand: MADRIX Pages: 28
Jabra 14201-20 - How To Connect preview
14201-20 -
Brand: Jabra Pages: 3
National Instruments RMC-8354 User Manual preview
RMC-8354
Brand: National Instruments Pages: 102
NAU ROBOTICS RC40A Operating Instruction preview
RC40A
Brand: NAU ROBOTICS Pages: 109
Native Instruments Maschine Mikro MK2 Getting Started preview
Maschine Mikro MK2
Brand: Native Instruments Pages: 181
YASKAWA Motoman MLX200 Hardware Installation & Software Upgrade preview
Motoman MLX200
Brand: YASKAWA Pages: 121
YASKAWA Varispeed f7 Technical Manual preview
Varispeed f7
Brand: YASKAWA Pages: 17
YASKAWA SI-EM3D Technical Manual preview
SI-EM3D
Brand: YASKAWA Pages: 58
YASKAWA 1000-Series Installation Manual preview
1000-Series
Brand: YASKAWA Pages: 30
Madison AV PC2 Reference Manual preview
PC2
Brand: Madison AV Pages: 2
PUTCO 8770HF Installation preview
8770HF
Brand: PUTCO Pages: 2

Brands by name

Popular brands

Load more brands