Wintriss SmartPAC PRO Servo, User Manual

Page: 24 / 228

1147100 SmartPAC PRO Servo User Manual
24 Chapter 1
– Introduction
SmartPAC PRO Servo Specifications
Table 1-1. Specifications
Equipment
Main enclosure: 14.1 x 13.1 x 5.3 in (358 x 333 x 134 mm), NEMA 12,
shock mounted. Weight 19.3 lb
Panel mount: 13.7 x 12.8 in (348 x 324 mm)
MTS linear position transducer: Magnetostrictive; electrical stroke 6 to 48
in. in 6-in. increments, 2.1 x 2.7 in., overall length 8.8 in. plus electrical
stroke
Electrical
Input: 115/230 ± 10% Vac50/60 Hz 30VA
Or 24Vdc ± 15% 37W
When installed, this equipment shall have in close proximity and easily
accessible, a switch or circuit breaker marked as the disconnect switch.
Operating
Conditions
Temperature 32 to 122 °F (0 to 50 °C)
Relative humidity: Indoor factory conditions
Altitude 6562 ft (2000 m)
Speed
300 SPM maximum
Accuracy
± 2/3°
Counters
Good parts, strokes, 3 batch with presets (7 digits)
Number-of-hits-on-tool counter: counts all hits on tool; resettable to 0 after
maintenance
Display
12.1 in (307 mm) color active matrix TFT liquid crystal display (LCD),
Power LED, Brake Warning LED
Memory
Allows storage of settings for 2000+ tools
Inputs/Out
puts
Inputs for position transducer, remote reset, and setup mode and for USB,
PS/2 and Ethernet RJ-45 connectors
Outputs for top stop, emergency stop: ratings 0-4 A resistive @ 120V max
(AC or DC); Normally open
–Held closed. Fault condition or power off
opens relay(s)
Communic
ations
Connects via Ethernet to local area network; data viewed via the internet
using SmartView remote viewing utility; allows backup of programmed tool
settings to a network drive.
Standard
Features
ProCamPAC provides up to 8 programmable cam switch output channels
(up to 15 channels with ProCamPAC 15 option) Programmable cam output
assembly: NEMA 12, holds up to 8 outputs
Enclosure: 9 x 11 x 3.5 in. (229 x 279 x 89 mm) shock-mounted Relay
SPDT 0-3 A resistive @ 240V
DC solid state SPST 2A @ 5-60 Vdc
AC solid state SPST 1A @ 70-250 Vac