Wintriss SmartPAC PRO Servo, User Manual

Page: 180 / 228

1147100 SmartPAC PRO Servo User Manual
180 Chapter 6
– Run Mode
•
Select UPPER LIMIT, key in the value you want in the Numeric Entry window, or use the
Up (

) or Down (

) cursor key to increment or decrement the Upper Limit setting, and
press ENTER. The value you specified displays in the UPPER LIMIT field.
3. Adjust/set the Lower Limit value in the same manner:
•
Inch the press to the desired position, and press SET LOWER LIMIT. The reading reported
by the linear sensor displays in the LOWER LIMIT field.
•
Select LOWER LIMIT, key in the value you want in the Numeric Entry window, or use the
Up (

) or Down (

) cursor key to increment or decrement the Lower Limit setting, and
press ENTER. The value you specified displays in the LOWER LIMIT field.
4. Press RESET when you are done to return to the Main Run Menu.
ERROR/EVENT LOG
(RUN
– ERROR LOG)
NOTICE
For HELP with the Error/Event Log, press ? when the screen is displayed.
This item enables you to view a list, called the Error/Event Log (see Figure 6-21), that displays in
reverse chronological order the 100 most recent errors or events that have occurred at the press or
within SmartPAC PRO Servo.
The Error/Event Log is useful as a troubleshooting aid. Each time the press is stopped due to a fault,
the log records the error message, which gives the reason for the stop, and the stroke count and ram
angle at which the stop occurred. When a new tool is loaded, the log displays the tool number. If
SmartPAC PRO Servo is connected to a computer network and e-mail is enabled, the log also shows
messages sent by SmartPAC PRO Servo. When SmartPAC PRO Servo is networked, you can send
the Error/Event Log to Wintriss Tech. Support (see
MESSAGING , page 182). Error messages
displayed on the Error/Event Log are documented in Chapter 7.
Figure 6-21. Error Event Log