Wintriss SmartPAC PRO Servo, User Manual

Page: 116 / 228

1147100 SmartPAC PRO Servo User Manual
116 Chapter 5
– Program Mode
Figure 5-13. Enter Password Window
If this window appears, enter your general password to loading the tool. See
SECURITY ACCESS , page 92, in Initialization to set password access.
2. Select the setting displayed in the PRESET VALUE column of the counter you want to program.
The Numeric Entry window displays, Figure 5-3.
3. Key in a preset value, following the directions in the window, and press ENTER. The value you
entered displays in the PRESET VALUE field for the counter you selected in step 2.
NOTICE
You can disable a counter by setting its preset value to zero.
4. Repeat steps 2 and 3 for each counter preset you want to program.
Changing Count Values
Under some circumstances, you may need to adjust the count upward or downward, or you may want
to start the count at some value other than zero. To change count settings, do the following:
NOTICE
ARE YOU “LOCKED OUT”?
If you cannot change count values, security access for the CHANGE COUNTS function may be set
to NO CHANGES ALLOWED. See
SECURITY ACCESS , page 92.
1. On the Counters screen, select the setting displayed in the COUNT column of the counter you
want to adjust. The Numeric Entry window displays, Figure 5-3.
NOTICE
You can return a count to zero by simply moving the highlight bar to the appropriate COUNT field
and pressing the CLEAR key.
2. Key in a new value, following the directions in the window, and press ENTER. The window
shown in Figure 5-14 displays, asking you to confirm that you want to change the COUNT value.