Wintriss SmartPAC PRO Servo, User Manual

Page: 127 / 228

SmartPAC PRO Servo User Manual 1147100
Chapter 5
– Program Mode
127
Figure 5-23. Sensor Names Screen
On this screen you can select one of the names displayed, or you can select one of the “custom”
names set in Initialization (see
CUSTOM SENSOR NAMES (Optional) , page 82).
To name a sensor, do the following:
1. Select a sensor (e.g., Sensor 1) on the Die Protection Sensor Menu. The Sensor Names screen
displays.
2. Select from the list of names the name that best describes the function of the selected sensor.
To view names that appear below the MORE NAMES line, press the Down (

) cursor key. A
new name appears each time you press the Down (

) cursor. When you have cycled through the
complete list, the highlight bar returns to UNNAMED, the first item.
3. If none of the names in the list seems suitable but you still want to name the sensor, select
“CUSTOM” NAME. The Custom Sensor Names screen displays, Figure 5-24.