Wintriss SmartPAC PRO Servo, User Manual

Page: 82 / 228

1147100 SmartPAC PRO Servo User Manual
82 Chapter 4
– Initialization Mode
CUSTOM SENSOR NAMES (Optional)
(INITIALIZATION
– CUSTOM SENSOR NAMES)
This item, which appears on the Main Initialization Menu only when DiProPAC is installed, allows
you to create “custom” names for up to 32 die protection sensors. The custom names you create in
Initialization provide the options available to you in Program mode when you select names for your
sensors. You create custom names on the Custom Sensor Names screen, Figure 4-14.
Figure 4-14. Custom Sensor Names Screen
To create a custom name, do the following:
1. Select CUSTOM SENSOR NAMES on the Main Initialization Menu. The Custom Sensor Names
screen displays.
2. Select the item for which you want to create a custom name (e.g., CUSTOM 1, CUSTOM 2, etc.).
The on-screen keyboard displays.
3. Key in the custom name, following the directions in the on-screen keyboard, then press Enter to
accept your entry. You are returned to the Custom Sensor Names screen with the custom name
you created displayed to the right of the selected item number. To cancel your selection, press
Cancel.
4. Repeat steps 2 and 3 for each item you want to name. To access CUSTOM 17 through CUSTOM
32 items, move the highlight bar down past “CUSTOM 16.” Additional Custom Name entries
display sequentially, one at a time.
5. Press Exit when you are done to return to the Main Initialization Menu.