Wintriss SmartPAC PRO Servo, User Manual

Page: 176 / 228

1147100 SmartPAC PRO Servo User Manual
176 Chapter 6
– Run Mode
installed the ProCamPAC 15 option. If you have assigned names to your cam channels in
Initialization mode, those names will be displayed. Channels programmed as Global cams are not
shown (see
SET GLOBAL CAMS (Optional) , page 80).
To adjust cam timings for the loaded tool, do the following:
1. On the Cam Switch Menu, select the channel you want to adjust. The Cam Channel Program
screen appropriate to the program type of the selected cam channel displays.
NOTICE
ARE YOU LOCKED OUT?
Access to items on this screen may be limited to Program mode or may require a password. The
security access settings in Initialization mode determine when changes can be made. See Table
4-5, page 94.
2. Adjust cam timings for the selected channel, following the instructions in the following sections
in Chapter 5:
•
Making an ON/OFF Setting, page 145
•
Setting Multiple ON/OFF Cycles , page 145
•
Making a Timed Output Setting , page 148
•
Setting DSV ON Channel Timing , page 149
3. When you are finished, press RESET to return to the Cam Switch Menu.
Viewing Cam Timing
(RUN
– CAM SWITCH –SHOW CAM TIMING)
You can view a real-time graphic display of the timing settings for your cams by pressing SHOW
CAM TIMING. The screen that displays is shown in Figure 6-18.
Cam channels are displayed by number on the Y-axis. Only eight channels can be displayed at a time,
so if a 15-channel ProCamPAC is installed, you must press ENTER to display channels 9 through 15.
The X-axis displays the ram angle (from 0° to 360°) at which channels turn on and off.
Channel On/Off timing is shown as a blue horizontal bar, the end points of which, when read against
the ram angle “ruler” on the X-axis, specify on and off settings for that channel. Channels with Timed
outputs are shown in pink characters beginning with the letter “T,” the position of which, when
viewed against the ram angle “ruler,” indicates the On angle, followed by a number (e.g., 50), which
indicates the channel’s On time in milliseconds.
The Cam Timing screen is updated once every second.