Wintriss SmartPAC PRO Servo User Manual Download Page 20 | Manualshive

Page: 20 / 228

background image

1147100

SmartPAC PRO Servo User Manual

20

Chapter 1

– Introduction

Every SmartPAC PRO Servo provides a magnetostrictive position transducer, eight-channel
programmable cam switch, and extensive counter capabilities. SmartPAC PRO Servo can make
instantaneous decisions for up to 8 cams (15 cams with the ProCamPAC 15 Linear board option) and
for up to 32 sensors if DiProPAC is installed. Because SmartPAC PRO Servo is microprocessor-
based, it can monitor or control all these different functions during a press stroke. Additionally, it
saves these settings for up to 2000 tools.

Programming and operation of SmartPAC PRO Servo are accomplished via its front panel, Figure
1-1. This includes a color liquid crystal (LCD) touch display and the Program/Run key switch.
Detailed instructions on how to use the display are provided in Chapter 3.

SmartPAC PRO Servo can be connected to a computer network, enabling press operation to be
monitored remotely and e-mail messages to be sent from the SmartPAC PRO Servo control.

SmartPAC PRO Servo can be configured with the following options:

•

Up to 32-sensor die protection system

•

Up to 16-channel programmable cam switch

•

Up to 32-sensor in-die measurement system

•

Solid-state dual-microprocessor-based clutch/brake control

•

Two- or four-input load monitoring

•

Automated shut-height and counterbalance control

•

Automated press speed and lubrication control

•

Servofeed interface

In addition, SmartPAC PRO Servo can be linked to Wintriss’s ShopFloorConnect Asset Utilization
Software (SFC) for data collection, analysis and reporting.

SmartPAC PRO Servo Standard Features

SmartPAC PRO Servo brings a multitude of press automation functions to one central location. The
following capabilities are standard features:

•

All settings are made at the operator console, using SmartPAC PRO’s large, bright, color touch
screen.

•

All tool programming is automatically saved in SmartPAC PRO’s non-volatile memory. To use
the same settings when you run the job again, simply re-load your stored tool number. SmartPAC
PRO Servo can save settings for 2000 tools.

•

SmartPAC PRO Servo’s programmable cam switch provides cam timings for feeder signals and
other press equipment, including global cams for press operation functions and multiple on-off
cycles.

•

Fault messages appear on the SmartPAC PRO display whenever the press malfunctions or
counter presets are reached. An error/event log maintains a record of the last 100 errors and
events.

•

SmartPAC PRO Servo is Ethernet-ready, allowing the control to be connected to any computer
network. Network connectivity allows press operations to be viewed remotely via the SmartView
utility and e-mail messages, containing diagnostics and error log information, to be sent from the
SmartPAC PRO.

«
...
18
19
20
21
22
...
»

Summary of Contents for SmartPAC PRO Servo





































































































































































































































Reviews:

No comments

Related manuals for SmartPAC PRO Servo

Brand: GARDTEC Pages: 48

Brand: FAAC Pages: 64

Brand: FAAC Pages: 12

Brand: H3C Pages: 69

Brand: ICP DAS USA Pages: 166

Brand: ICP DAS USA Pages: 64

Tunnel Master Jr

Brand: ICS Pages: 83

PROFIBUS PROFI-2510

Brand: ICP DAS USA Pages: 4

Brand: ICP DAS USA Pages: 40

Brand: Uniden Pages: 28

Brand: UniFocus Pages: 23

Brand: UniFocus Pages: 6

Brand: HQ Power Pages: 23

CentralControl CC41

Brand: Becker Pages: 48

Brand: GSK Pages: 32

Brand: Daikin McQuay Pages: 8

Brand: Quickie Pages: 108

Brand: GARDINER TECHNOLOGY Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands