Wintriss SmartPAC PRO Servo, User Manual

Page: 100 / 228

1147100 SmartPAC PRO Servo User Manual
100 Chapter 4
– Initialization Mode
2. Select E-MAIL FUNCTION and press ENTER to toggle the setting to ENABLED.
3. Press EXIT to return to the Main Initialization Menu.
If you don’t plan to use E-mail, set the E-MAIL FUNCTION item to DISABLED.
SMARTVIEW FUNCTION
(INITIALIZATION
– SETUP NETWORK – SMARTVIEW FUNCTION)
NOTICE
Consult your network administrator when setting up SmartView.
SmartPAC PRO Servo’s SmartView function enables individuals on your o network to remotely view
the status of each press. (Information about setup and operation of SmartView is provided on
http://www.wintriss.com/wcg/automation/smartview/smartview_setup.html .) If you plan to use
SmartView, do the following to enable this function:
1. Select SMARTVIEW FUNCTION and press ENTER to toggle the setting to ENABLED.
2. Press EXIT to return to the Main Initialization Menu.
If you don’t plan to use SmartView, set the SMARTVIEW FUNCTION item to DISABLED.
SETUP E-MAIL
(INITIALIZATION
– SETUP NETWORK – SETUP E-MAIL)
NOTICE
Contact the Wintriss Factory for instructions on how to use this feature.
CHANGE NETWORK SETTINGS
(INITIALIZATION
– SETUP NETWORK – CHANGE NETWORK SETTINGS)
This item is to be used only by your Information Technology or Information Systems person. Call
Wintriss Tech. Support for assistance in making advanced network settings.
PRESS TYPE
(INITIALIZATION
– SETUP NETWORK – PRESS TYPE)
Your entry for the PRESS TYPE item is used by SmartView remote viewing to select the graphic it
uses to illustrate the type of press (i.e., straight side or gap frame) on which SmartPAC PRO Servo is
installed. This graphic appears in the press information summary on the SmartView Main Page.
To set the press type, do the following:
1. Select PRESS TYPE, then press ENTER to toggle between GAP FRAME and STRAIGHT SIDE
until the option you want is displayed.
2. Press Exit to return to the Main Initialization Menu.