Wintriss SmartPAC PRO Servo, User Manual

Page: 78 / 228

1147100 SmartPAC PRO Servo User Manual
78 Chapter 4
– Initialization Mode
PRESS NAME
(INITIALIZATION
– PRESS NAME)
This item enables you to name the press on which SmartPAC PRO Servo is installed. When you
select PRESS NAME, the on-screen keyboard appears, allowing you to enter the press name.
Figure 4-9.Press Name Entry Window
SELECT CAM NAMES (Optional)
(INITIALIZATION
– SET CAM NAMES)
NOTICE
CAM NAMES ENTERED IN INITIALIZATION APPLY TO ALL TOOLS
The names you assign to cam channels in Initialization apply to all tools. If, for example, you
“custom-name” Channel 1 as “Bypass 3,” then Channel 1 is “Bypass 3” for every tool loaded.
Do the following to assign cam channel names:
1. Press SELECT CAM NAMES on the Main Initialization Menu. The Cam Channel Name Menu,
shown in Figure 4-10, displays. The first time you access this screen, all channels are named
“UNNAMED.”