Whirlpool ADVANTECH CAE2761K, Installation, Operation And Service Instructions

Page: 116 / 178

5-2
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
MOTOR
Refer to page 4-11 for the procedure for ser-
vicing the motor.
1. Unplug washer or disconnect power.
2. Disconnect the plug from the motor con-
nector.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to the fol-
lowing motor lead colors (shown on the
connector plate). The meter should indi-
cate as shown in the Motor Test Table.
5. Touch the ohmmeter test leads to the fol-
lowing motor switch connections. The
meter should indicate as shown in the
Motor Switch Test Table.
Motor Connector
R
BK
V
BU
OR
LOW
HIGH
START
V
BU
BU
BK
R
OR
CENTRIFUGAL
SWITCH
Y
W-BK
W
DRIVE MOTOR
WASHERS
FUNCTION TEST TERMINALS READING
LOW SPEED V TO W-BK 18-26 OHMS
HIGH SPEED BU TO W 1 - 1.5 OHMS
START WINDING
BK TO Y 5 - 10 OHMS
THERMAL
PROTECTOR
W TO W 0 OHMS
MOTOR TEST TABLE
STATE TEST TERMINALS READING
R TO BK
OR TO BU
OR TO V
R TO BU
R TO BK
OR TO BU
OR TO V
R TO BU
* SWITCH ARM CAN BE RELEASED BY REMOVING
THE SWITCH FROM THE MOTOR
MOTOR SWITCH TEST TABLE
AT REST
1 - 2 OHMS
OPEN
(INFINITE OHMS)
AT SPEED OR
SWITCH ARM
RELEASED*
1 - 2 OHMS