Whirlpool ADVANTECH CAE2761K, Installation, Operation And Service Instructions

Page: 44 / 178

2-30
COlNDROP INSTALLATION,
CSP STACK DRYERS
ADVANTECH

stack dryers are equipped with
2 control boards, one per dryer. Money accep-
tors (not included) for the upper and lower
dryer can be of different types i.e. upper
coinslide, lower coindrop, lower coindrop, up-
per SMART Card, etc.
When installing SMART Card readers or
coindrops, it is
very important to thread the
harness from the proper board to the collar
money acceptor opening for the desired dryer
(upper or lower).
The upper dryer (right money acceptor open-
ing) is controlled by the board farthest back in
the collar assembly. The front board will control
the lower dryer (left collar opening).
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Coindrop Into
Upper Opening Of
Collar Assembly
1. Unplug or disconnect electrical power.
2. Unlock the cam lock on the right side of the
console.
3. To remove the console, pull the right end
out, and slide it away from the collar.
NOTE: Make sure that all wiring harness con-
nections are secure prior to closing the console
after servicing or installing money acceptors.
4. Perform steps 2 through 4 on page 2-28.
5. Thread the coindrop harness in through the
upper metercase opening, then to the con-
sole following the routing of the factory
coinslide harness.