WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 97 of 206
This parameter will change the value of
TRAVEL_RATE_DEC for a value equal to one of the
fallowing options:
-
Slowest
: 20% Dynamic Speed;
-
Slow
: 40% Dynamic Speed;
-
Normal
: 60% Dynamic Speed;
-
Fast
: 80% Dynamic Speed;
-
Fastest
: 100% Dynamic Speed;
-
Custom
: Uses the travel rate defined in the Travel Time CLOSE filed
(TRAVEL_RATE_DEC parameter).
Closing Speed Limit: Used to reduce the speed of the close valve movement.
This parameter will change the value of
TRAVEL_RATE_INC for a value equal to one of the
following options:
-
Slowest
: 20% Dynamic Speed;
-
Slow
: 40% Dynamic Speed;
-
Normal
: 60% Dynamic Speed;
-
Fast
: 80% Dynamic Speed;
-
Fastest
: 100% Dynamic Speed;
-
Custom
: Uses the travel rate defined in the Travel Time CLOSE filed
(TRAVEL_RATE_INC parameter).
Close Time Interval: Last time interval to travel from opened to closed position
in seconds.
Open Time Interval: Last time interval to travel from closed to opened position
in seconds.
9.3.2.8 Clock
A subdirectory of Parameters/Transducer, it allows the user to configure the time and
date of the device’s RTC.
Time and
Date:
Current date from RTC (TIME_AND_DATE parameter). Write in this
parameter to adjust the RTC.
The DTM will display the time and date format according to what is
defined on Windows (see time and date format configurations in
Windows Control Panel in order to change it). Setting a new
TIME_AND_DATE value must follow the same format, otherwise, the
DTM will reject it.
Independent to what's defined in Windows settings, the device will
