WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 71 of 206
Relative
Index
Parameter Name
Description
Default
Value
Read/
Write
action (reverse acting)
87
VALVE_OPEN_SLEW_LIMIT
Used to reduce the speed of
the open valve movement.
This value will change the
value of
TRAVEL_RATE_INC for a
value equal to this index.
- r,w
88
VALVE_CLOSE_SLEW_LIMIT
Used to reduce the speed of
the close valve movement.
This value will change the
value of
TRAVEL_RATE_DEC for a
value equal to this index.
- r,w
89
PRESSURE_UNITS
Engineering unit for the
pressure sensor value
(SUPPLY_PRESSURE
parameter).
1342:% r,w
90
SUPPLY_PRESSURE
Pressure sensor value -
reserved for future use. (The
current manifold has
pressure sensor only one
output - port A)
0 r
91
PRESSURE_A
Pressure of manifold output
port A - It is located in the
port A. Its unit is defined in
the PRESSURE_UNITS.
The accuracy over the span
is ± 2% between 0 - 50ºC.
The offset has a variation of
3.5% for each 1ºC of
variation.
If the unit is %, then 100% is
the maximum pressure used
in the calibration.
0 r
92
PRESSURE_B
Pressure of manifold output
port B - reserved for future
use. (The current manifold
has pressure sensor only
one output - Port A)
0 r
93
INTERNAL_TEMP_UNIT
Electronic board temperature
unit
1001: ºC
r,w
94 INTERNAL_TEMP
Electronic
board
temperature. The
temperature unit is defined
by INTERNAL_TEMP_UNIT.
0 r
95
XD_COMMAND
Used to start part of auto
calibration - HALL sensor
0 r,w