WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 66 of 206
Relative
Index
Parameter Name
Description
Default
Value
Read/
Write
from OPEN to CLOSE
position (in sec.) for total
system
(Positioner, actuator and
valve). Measured while
commissioning.
10 ACT_STROKE_TIME_INC Minimum of time to move
from CLOSE to OPEN
position (in sec.) for total
system
(Positioner, actuator and
valve). Measured while
commissioning.
- r
17
TAB_ENTRY
The TAB_ENTRY parameter
identifies which element of
the table is in the
TAB_X_Y_VALUE parameter
currently
0 r,w
18
TAB_X_Y_VALUE
The TAB_X_Y_VALUE
parameter contains one
value couple of the table.
The values shall be in % of
span.
The last valid entry shall be X
equal to 100%.
- r,w
19
TAB_MIN_NUMBER
For device internal reasons
(e.g. for calculation)
sometimes it is necessary to
use a certain number of table
values in minimum. This
number is provided in the
TAB_MIN_NUMBER
parameter.
- r
20 TAB_MAX_NUMBER
TAB_MAX_NUMBER is the
maximum size (number of
TAB_X_VALUE and
TAB_Y_VALUE value pairs)
of the table in the device.
- r
21
TAB_ACTUAL_NUMBER
Contains the actual numbers
of entries in the table. It will
be calculated always when
the TAB_X_Y_VALUE
received a new write. It will
receive the number of
consecutive valid entries. A
valid entry has at least one
value, X or Y, different of
- r
