WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 204 of 206
16.
Repeat the steps to add OUT (long)
module in the slot 2.
17. Press OK to return to Slave Setup Dialog.
18. Press OK to return to ProfiCaptain.
19. Select in the File menu the "Save Project"
option.
20. Select the directory and the file name to
store this project.
21. At ProfiCaptain, press "Setup Master" in to
open the Master system configuration.
22. Press "Operate" and wait until the Current
State is set to Operate.
23.
Press Set/AutoDetect Bus parameters
to open the Bus parameters
configuration dialog. Waiting until the
ICoT is in the live list and press OK to
return to Master System Configuration
dialog - The ProfiUltra interface will be
in the address 1. After a factory default
the ICoT will have address set to 126;
24. Using the keypad menu change the
address to match the address used in the
project or change the address set in the
project.