WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 34 of 206
5.8.5 Manual Override of Input Signal via On-Board Keypad (Stro)
The positioner has a feature which
allows the operator to override the
analog set-point signal and change
valve position from the keypad. This is
done from the
Stro (Manual Override-
Stroke Menu).
Enter calibration as
described in section 5.8.1 and use the
down arrow button to cycle to the
Stro
menu. Enter this menu and control the
position of the valve as shown in
routine to the right.
5.8.6 Node Address Assigning (Node Add)
This option is to set the
node address used in the
PA device.
There are 128
addresses available.
0 up to 127;
The address 127 is
reserved for
broadcast;
The address 126 is
reserved for new
devices;
The address 0
should be reserved
