WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 60 of 206
Relative
Index
Parameter Name
Description
Default
Value
Read/
Write
ST_REV shall be
incremented at least by one if
at least one static parameter
in the corresponding block
has been modified.
This provides a check of the
parameter revision. ST_REV
shall be reset to zero or
incremented at least by one
to indicate the change of
static parameters in case of a
cold start (i.e. if
FACTORY_RESET=1 is set).
Additionally the ST_REV
shall be increased if a
change of a table is
accepted. The value of the
static revision parameter may
be used by a configuration
device to determine if a block
parameter(s) stored in static
memory (as defined as "S" in
the parameter attribute table)
has changed its value.
In case of an overflow
ST_REV should be set to 1.
2
TAG_DESC
The tag description is a user-
supplied description of the
block. Every block can be
assigned such a textual tag
description.
´ ´
r,w
3
STRATEGY
The STRATEGY parameter
has a user-specified value.
This assigned value can be
used in configuration or
diagnostics as a key in
sorting block information.
0 r,w
4
ALERT_KEY
The ALERT_KEY parameter
has a user assigned value
which may be used in sorting
alarms or events generated
by a block (*). It can contain
the identification number of
the plant unit. It helps to
identify the location (plant
unit) of an event.
0 r,w
5 TARGET_MODE
The
TARGET_MODE
-
r,w