Fig. 11: Identifying Cutting Points
Courtesy of VOLVO CARS CORPORATION
If the entire side member does not need replacing, see the cutting point in the illustration.
Cutting point (1)
This cutting point is used in the event of minor damage to the side member.
Cutting point (1) is located 180 mm (M2) from the end of the member.
Take care when sawing, as there is a reinforcement inside. See the shaded part of the illustration.
Cutting point (2)
Cutting point (2) is located 680 mm (M3) from the end of the member.
2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation
