Fig. 63: View Of Cutting The Left-Hand Side
Courtesy of VOLVO CARS CORPORATION
shows cutting on the left-hand side.
Fig. 64: View Of Cardboard Covering Rear Edge Engine Bay
Courtesy of VOLVO CARS CORPORATION
Cover the underneath of the engine at the rear edge with cardboard or similar, so that drilling shavings
does not blow up into the engine compartment.
Carefully drill out the two holes at the rear edge where the clips were located. Use tool
P/N 9814112
.
File down the edges of the holes.
Remove any shavings.
NOTE:
Rustproof the hole edges thoroughly.
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories