Fig. 67: View Of Radiator Bracket Marking
Courtesy of VOLVO CARS CORPORATION
Make a longitudinal marking
8.5 mm (21/64")
from the front edge and on the radiator bracket opposite
where the locating lug was cut off.
Do the same on the other side where the other locating lug was cut off.
Fig. 68: Identifying Splash Guard Screws
Courtesy of VOLVO CARS CORPORATION
Take workshop lift
part no. 9985972
and fixture
part no. 9995972
and use it as a support when handling
the engine splash guard in the following points.
Position the engine splash guard on the lift and raise it towards the subframe.
Secure it in the two rear holes using screws and washers from the kit. One washer under the screw head
and two washers between the panel and the subframe for each mounting.
2012 Volvo C30 T-5
ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
