VIPA System 200V IM Series, Manual

Page: 293 / 348

Manual VIPA System 200V
Chapter 7 SERCOS - Spare part
HB97E - IM - Rev. 06/29 7-11
The modules are scanned from the left to the right (Plug-in location 1 to 32)
and separated after input and output the identifiers are created:
•
Input channels are created in steps of 10s as S-2-ccc0 identifier.
Here is ccc = 000 ... 255.
Range: S-2-0000, S-2-0010, S-2-0020, ... S-2-2550
•
Output channels are created in steps of 10s as S-3-ccc0 identifier.
Here is ccc = 000 ... 255
Range: S-3-0000, S-3-0010, S-3-0020, ... S-3-2550
•
If you plug-in parameterizable modules, a P-0-ssxx identifier block is
created for each module. Here is:
Plug-in location: ss = 01 ... 32, Parameter: xx = 00 ... 17
Example: P-0-0100 (module in plug-in location 1), P-0-0200 (module in
plug-in location 2), ... P-0-3200 (module in plug-in location 32)
For the S-Identifier there are the following information:
Name (consists of max. 32 characters)
Format
: S.I.T_W.D
with
S = plug-in location (1..32)
I = module internal Byte offset at multi channel modules (0..15)
T = Type: (DIGITAL, ANALOG)
W = Data width: (BYTE, WORD, DOUBLE =1,2,4Byte)
D = Direction: (IN,OUT)
Example
: Name: “1.0.DIGITAL_BYTE.IN” means:
The module in plug-in location 1 provides one Byte digital
input data starting at the internal address 0 .
Attribute
in accordance to the SERCOS specification, the attribute fixes if the
operating date is readable res. writeable. More detailed information is to
find in the SERCOS specification of the SERCOS Committee.
Operating date
Here the in- res. output date with the according data width.
VIPA specific
assignment of the
IDN S-2-xxxx, S-3-
xxxx and P-0-xxxx
VIPA specific
S-Identifier