VIPA System 200V IM Series, Manual

Page: 274 / 348

Chapter 6 DeviceNet
Manual VIPA System 200V
6-14 HB97E - IM - Rev. 06/29
The following example is intended to show the configuration of the System
200V. Let us assume that the system has the following structure:
DN-
Slave
IM253DN
DI 8
SM221
DI 8
SM221
DI 8
SM221
DO 8
SM221
DO 8
SM221
DO 8
SM221
DO 8
SM221
DO 8
SM221
Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8
DO 8
SM231
Slot 9 Slot 0
AI 8
SM231
Param.
10 Byte
Slot 10
The example shows a DeviceNet coupler with 10 modules; however, the
modules installed in plug-in locations 1 to 9 can not be configured.
Below follows the description of the configuration of the analog-module in
location 10:
Precondition:
- the hardware was assembled and is active on the bus.
-
the Allen - Bradley
DeviceNet-Manager
was installed.
•
Execute the function WHO in the
DeviceNet-Manager
and open the
parameter window by double-clicking the DeviceNet coupler.
•
Locate an unused group in the parameter list (Value=0000 0000)
•
Double-click the "Len"-parameter.
The analog module has 10Byte of parameter data. Enter this value as a
bit-coded value.
•
Click [Next>>] and enter the location 10 as the "slot".
•
You may now enter the parameter bytes of your module by clicking
[Next >>] repeatedly.
Example