VIPA System 200V IM Series, Manual

Page: 65 / 348

Manual VIPA System 200V
Chapter 3 Profibus DP
HB97E - IM - Rev. 06/29 3-33
For the display of ftp sites in your web browser you may have to execute
the following adjustments:
Internet Explorer
ftp access only with version 5.5 or higher
Options
>
Internet options
, Register "Advanced" in the area "Browsing":
- activate: "Enable folder view for ftp sites"
- activate: "Use passive ftp ..."
Netscape
ftp- access only with version 6.0 or higher
No further adjustments are required
If you still have problems with the ftp access, please ask your system
operator.
•
Get the RUN-STOP lever of your CPU in position STOP.
•
Turn off the voltage supply.
•
Plug the MMC with the firmware into the CPU. Please take care of the
correct plug-in direction of the MMC.
•
Turn on the voltage supply.
•
After a short boot-up time, the alternate blinking of the LEDs SF and FC
shows that the firmware file has been found on the MMC.
•
You start the transfer of the firmware as soon as you tip the RUN/STOP
lever downwards to MRES within 10s. The CPU shows the transfer via a
LED blink line.
•
During the update process, the LEDs SF, FC and MMC are alternately
blinking. This may last several minutes.
•
The update is successful finished when all CPU-LEDs are on. If they are
blinking fast, an error occurred.
•
After Power OFF - ON the Master starts with new firmware.
Note!
Details to the firmwareupdate can be found at ftp.vipa.de at
support
.
Preconditions for
ftp access
Transfer firmware
from MMC into DP
master