VIPA System 200V IM Series, Manual

Page: 301 / 348

Manual VIPA System 200V
Chapter 7 SERCOS - Spare part
HB97E - IM - Rev. 06/29 7-19
For example, the following values shall be set:
AI 4x16Bit (231-1BD52) at position 1
Length: 10Byte
Parameter:
Byte Description Set property Handling value
0 Diagnostic alarm Byte: deactivated 00h = 0dez
1 reserved 00h 00h = 0dez
2 Function no. channel 0
Voltage
±
10V in the S7
format from Siemens
28h = 40dez
3 Function no. channel 1
Voltage
±
10V in the S7
format from Siemens
28h = 40dez
4 Function no. channel 2
Current 4...20mA in S7
format from Siemens 2Dh = 45dez
5 Function no. channel 3 Current 4...20mA in S7
format from Siemens 2Dh =45dez
6 Option Byte channel 0 default 00h = 0dez
7 Option Byte channel 1 default 00h = 0dez
8 Option Byte channel 2 default 00h = 0dez
9 Option Byte channel 3 default 00h = 0dez
Herefore the table has the following entries:
P-0-0100 1.SLOT At position 1 is a parameterizable
module
P-0-0101 1.LENGTH 10dez
P-0-0102 1.PARAMETER.0 0dez
P-0-0103 1.PARAMETER.1 0dez
P-0-0104 1.PARAMETER.2 40dez
P-0-0105 1.PARAMETER.3 40dez
P-0-0106 1.PARAMETER.4 45dez
P-0-0107 1.PARAMETER.5
45dez
P-0-0108 1.PARAMETER.6 0dez
P-0-0109 1.PARAMETER.7 0dez
P-0-0110 1.PARAMETER.8 0dez
P-0-0111 1.PARAMETER.9 0dez
P-0-0112 1.PARAMETER.10
... ... are created but not used
P-0-0117 1.PARAMETER.15
Set the value in
P-0-0000
to 1 and the parameters are stored in the
EEPROM of the SERCOS coupler.
At successful transfer, you get the return value 0 and at the analog input
module the LEDs F2 and F3 for wirebreak recognition are illuminated due
to the current measuring range.
Example
parameterization