VIPA System 200V IM Series, Manual

Page: 275 / 348

Manual VIPA System 200V
Chapter 6 DeviceNet
HB97E - IM - Rev. 06/29 6-15
The analog input module has the following parameters:
Byte Bit 7 ... Bit 0 Default
0 Diagnostic alarm byte:
Bit 0 ... 5: reserved
Bit 6: 0: Diagnostic alarm inhibited
1: Diagnostic alarm enabled
Bit 7: reserved 00h
1 reserved 00h
2 Function no. channel 0 (see module description) 2Dh
3 Function no. channel 1 (see module description) 2Dh
4 Function no. channel 2 (see module description) 2Dh
5 Function no. channel 3 (see module description) 2Dh
6 Option byte channel 0 00h
7 Option byte channel 1 00h
8 Option byte channel 2 00h
9 Option-byte channel 3 00h
•
When all parameters have been entered into the group you transfer and
save the parameters in the DeviceNet coupler by means of [Save to
Device].
•
During the transfer the status text is displayed as "Status: downloading".
When the transfer has been completed the status text changes to
"Status: Device Values"
Note!
Parameters may be changed at any time. For this purpose you have to
click [Load from Device], then enter the required changes and save them
by means of [Save to Device].