VIPA System 200V IM Series, Manual

Page: 134 / 348

Chapter 3 Profibus DP
Manual VIPA System 200V
3-102 HB97E - IM - Rev. 06/29
Electrical data VIPA 253-2DP50
Power supply DC 24V (20.4 ... 28.8V), ext. power supply at front
Current consumption max. 1A
Output current backplane bus max. 3.5A
Isolation
≥
AC 500V
Status indicator via LEDs on the front
Connections/interfaces
2 channels 9pin D-type socket (2x) Profibus connector
DP1 / DP2
Profibus interface
Connection 9pin D-type socket (2x)
Network topology Linear bus, active bus terminator at both ends, tap lines
are permitted.
Medium Screened twisted pair cable, under certain conditions
unscreened lines are permitted.
Data transfer rate 9.6kBaud to 12MBaud (automatic adjustment)
Total length 100m without repeater for 12MBaud;
1000m with repeater
Max. no. of stations 32 stations in any segment without repeater. Extendible
to 126 stations when using repeaters.
Diagnostic functions
Standard diagnostic The last 100 results are stored in Flash-ROM.
Extended diagnostic -
Combination with peripheral modules
max. no of modules
32 (depending on current consumption)
max. digital I/Os 32
max. analog I/Os 16
Dimensions and weight
Dimensions (WxHxD) in mm 50.8x76x78
Weight 120g
Profibus DP
slave
(redundant)
IM 253DPR
(DP-V0)