VIPA System 200V IM Series, Manual, Page: 135 / 348

Manual VIPA System 200V
Chapter 3 Profibus DP
HB97E - IM - Rev. 06/29 3-103
Electrical data VIPA 253-2DP20
Power supply DC 24V (20.4 ... 28.8V), ext. power supply at front
Current consumption max. 5A
Output current backplane bus max. 3.5A
Isolation ≥
AC 500V
Status indicator via LEDs on the front
Connections/interfaces 9pin D-type socket Profibus connector
Profibus interface
Connection 9pin D-type socket
Network topology Linear bus, active bus terminator at both ends.
Medium Screened twisted pair cable, under certain conditions
unscreened lines are permitted.
Data transfer rate 9.6kBaud to 12MBaud (automatic adjustment)
Total length 100m without repeaters for 12MBaud;
1000m with repeaters
Max. no of stations 32 stations in any segment without repeaters. Extendible to
126 stations when using repeaters.
Diagnostic functions
Standard diagnostic The last 100 results are stored in Flash-ROM.
Extended diagnostic -
Combination with peripheral
modules
max. no of modules 31 (depending on current consumption)
max. digital I/Os 31
max. analog I/Os 16
Output unit
Number of outputs 24
Nominal load voltage DC 24V (20.4...28.8V) supplied internally via Profibus coupler
Output current per channel 1A (sum current max. 4A)
Status indicator Power (PW) fuse OK, Error (ER) short circuit, overload
Programming data
Output data 4Byte (3Byte are used)
Dimensions and weight
Dimensions (WxHxD) in mm 50.8x76x78
Weight 150g
Profibus DP
slave
(combination
module)
IM 253DP
DO 24xDC 24V
DP-V0