VIPA System 200V IM Series, Manual

Page: 153 / 348

Manual VIPA System 200V
Chapter 4 Interbus
HB97E - IM - Rev. 06/29 4-17
As mentioned before, Interbus generates a data area containing both input
and output bytes. The assignment of the modules connected to the bus
coupler and the bits and bytes of the process image is provided by the bus
coupler.
The Interbus master exchanges a contiguous input and output data block
with every Interbus coupler. The data modules of the PLC or the
configuration software allocate the bytes contained in this data block to the
addresses of the process image.
Master-Software Configuration
software Manufacturer
PLC-interfaces version <4 SYS SWT Phoenix Contact
PLC-interfaces version <4 IBM CMD Phoenix Contact
PC-interfaces version <3 SYS SWT Phoenix Contact
general SYS SWT Phoenix Contact
Configuration of
the master