System settings
88
Set ISOBUS communi-
cation
The spreader can be driven by an external signal, which could for
instance be transmitted by a GPS receiver, nitrogen sensor or memory
card. To assign a controlling function to the external signal, it must be
received in the 'Task Controller' screen.
Setting communication with
an external system
Acceptance of an external signal and the correct form of communi-
cation must be checked and adjusted as required.
Also refer to the user manual of the tractor or control box.
Go from one of the settings screens to the ISOBUS communication
menu.
See »Menu structure« on page 42.
Scroll to the 'TC Config & License' screen.
In this screen, you can control and/or modify the settings of the Task
controller:
•
Task controller on / off
•
2 options of memory cache are:
•
Reception of an external signal, whereby spreading details are
stored in the parcel registration of the control system
(internal).This setting is activated when a "tick" is visible in the
input field.
•
Reception of an external signal, in which the spreading details
are sent back to the source of the external signal, for example
a memory card. This setting is activated when the “+E” sign
If you return the spreading details to the source of the external signal,
you cannot reach the system's field registration. Dual storage is not
possible.
See then section »Variable, externally driven application rate« on
page 126 for further details.
•
Receipt of an external application rate on / off.
With this option, you allow the set application rate to be modified by
the externally defined application rate.
•
Spreader control On/Off
You can turn the Spreader control function on or off here with the
spreader intended for the purpose.
The lowest part of the screen displays the setting of the working width
distribution before spreading with Spreader control:
•
The maximum number of sections is 24.
•
The standard weighing spreader has 2 sections (L/R lockable).
•
Each section has a working width of 12 metres here.
S
Spreader control On/Off
S
Receiving an external
application rate
S
Memory cache
internal / external
S
Task controller
On/Off
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
