Vicon RO-M EW, User Manual, Page: 82 / 225

System settings
82
Over and under dosing
unit
While spreading, you can manually (one-sided) over- or underdose on
the main screen. By pressing 1 time on the plus key or minus key
beside the screen, you can adjust the application rate by a percentage
of the application rate or a preset number of kilograms. You can enter
the percentage or number of kilograms on the main screen.

Press on the field of your choice:
•
Percentage
•
or kg.
The choice is engaged (ticked).
calibration test side
You can perform the calibration test on the left or right spreading disc.
The control system must know what side you want to do the calibration
test on to open the correct dosing unit.

See section »Manually entered application rate« on page 119.

Press on the field of your choice:
•
Right side
•
or left side.
The choice is engaged (ticked).
T
IP
If your machine is equipped with a TrimFlow, it is recommended that
you choose the left side for the calibration test. There you will have
more space to move, for example to assemble or disassemble the
vanes and the calibration container.
Settings screen (2)
Press the scroll key to go from the "Settings" screen to the second
‘Settings’ screen.
Here you can select either the metric or the imperial display.
Selection for Metric /
Imperial Go to the next Settings screen to switch to Imperial values.

Press on the field of your choice:
•
Metric
•
or Imperial.
The choice is engaged (ticked).
S
Over and under
dosing unit
S
calibration test
side
S
Selection for Metric / Imperial