Vicon RO-M EW User Manual Download Page 197

Page: 197 / 225

Maintenance

197



Open the sieves and lock them.



Remove the agitator from the agitator axle.



Support the fertiliser bearing ring through a dosing opening so that
it will not drop.



Remove the 3 fastening bolts from the seal rings.



Remove the metal seal rings.



Check the condition of the agitator axle.



Replace the fertiliser sealing ring.



Put the metal seal rings back in position.



Put the 3 fastening bolts back in place.

You can let go of the bearing ring after the first fastening bolt has been
put back in place.



Put the agitator back into the agitator axle.

Check the connections as described in



section »Check the settings of the dosing mechanism« on page
189.

Agitator axle

Seal ring

Plastic sealer ring

Agitator axle

Bolt holes

Agitator axle

Agitator

Summary of Contents for RO-M EW


































































































































































































































Search results

Summary of Contents for RO-M EW

Reviews:

Related manuals for RO-M EW

Brands by name

Popular brands

Vicon RO-M EW, User Manual

Search results

Summary of Contents for RO-M EW

Reviews:

Related manuals for RO-M EW

Brands by name

Popular brands