Maintenance
184
Oil and grease
content
Never use more oil or grease than prescribed
A very high oil level may result in an overheated machine and
damaged seals.
Waste storage and disposal
Waste from performing maintenance on the machine could be
contaminated with fertiliser, oil and grease. Collect the waste and
dispose of it in accordance with national regulations.
Lubricating points
All grease nipples of the machine can be filled with a universal grease
type.
See »Oil and grease content« on page 184.
See »Maintenance intervals« on page 183.
Coupling shaft with
quick lock
Lubricate the 4 nipples.
Check the condition of the protection sleeves and the check
chains.
Replace them if damaged.
Coupling shaft profiled tubes
Grease the contact surfaces of the two profiled tubes.
Detach the coupling shaft on one side.
Pull the shaft halves away from each other.
Grease the running surface of the innermost profiled tube.
Slide the coupling shaft halves into each other.
Attach the coupling shaft.
Hook the check chains into the tractor side.
Discharge bushings
The discharge bushings are borne and fastened at the agitator axle
and have 1 grease nipple.
Turn the spreading disc by hand until the grease nipple is visible.
Grease the nipple of both discharge bushings.
Part / action
Quantity
Specifications
Central gearbox
0.18 +/- 0.02 litre
gearbox grease EP00/000
gearboxes of the spreading discs
0.20 +/- 0.02 litre
gearbox grease EP00/000
Lubricate with grease
1 to 2 times
Shell Rodina 2, Castrol GS2 or equivalent
Lubricate with oil
SAE 80W-90 MIL-L-2105C
Grease nipples
Greasing
Grease nipple
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
